Fit Raptor 30/50
Add stiffness to your frame to do hard 3D !!
Avoid twisting.
Save your frame in a crash !!!

WEIGHT: 23.50 Grams
THICKNESS: 2.25MM

Bolt your servo directly at the beginning of the tail boom using the same 2 mounting hole that clamp the tail boom.
Hardware include 2 M3 screw + washer.

Weight Only 5.76 Grams
TICKNESS: 2.25MM (0.085")

Weight Only 31.50 Grams
2.25MM (0.085'') Thick
Vertical fin Longer than stock to keep expensive tail blade out of grass.

Weight Only 31.46 Grams
2.25MM (0.085'') Thick
Vertical fin Longer than stock to keep expensive tail blade out of grass.

Weight only 15.45 Grams
2.25MM (0.085'')Thick

Weight only 9.66 Grams
2.25MM (0.085'') Thick
Smaller than stock.

Weight only 16.05 Grams
2.25MM (0.085'') Thick
Vertical fin Longer than stock to keep expensive tail blade out of grass.

Weight only 21.80 Grams
2.25MM (0.085'') Thick
Vertical fin Longer than stock to keep expensive tail blade out of grass.

WEIGHT: 43.50 Grams
LENGTH: 640MM

Length: 600MM 
Width: 54MM 
Hole: 4MM
Root thickness: 12MM
Weight:  260 Grams/pair

WEIGHT: 2.5 Grams (10)
Fit Standard servo
Replace the original aluminium servo braket to save weigth and add a better look.

Use this carbon servo boom mount with  after market boom clamp and you will align perfectly the rod with the tail boom to allow the use of rod boom guide.

WEIGHT: 4 Grams
THICKNESS: 2.25MM

FLYBAR DIAMETER: 3MM
WEIGHT: 31Grams/Pair
LENGTH: 79.50MM
WIDTH: 54.50MM